Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

PET BOTTLE BLOWING MACHINE

Status
Not open for further replies.

Guest
1.) CM-9A STRETCH BLOW-MOULDING MACHINE
2.) KINTL-5G BOTTLE BLOW-MOULDING MACHINE FOR 5 GALLON PET BOTTLE.
3.) XP2500 AUTOMATIC BOTTLE BLOW-MOULDING MACHINE
For picutes, please visit

 
Status
Not open for further replies.

Similar threads

Myint Mo
  • Locked
  • Question
Injection Modling Machine 1
Replies
2
Views
816
Myint Mo
Myint Mo
Azeen
  • Locked
  • Question
Mixing virgin and recycled Polypropylene Granules in single use plastic straw extrusion machine
Replies
5
Views
882
Linda0510
Linda0510
Tezza91
  • Locked
  • Question
How does the clamping cylinder and ejector work on this 2 platen machine?
Replies
2
Views
277
Tezza91
Tezza91
prdave00
  • Locked
  • Question
Supplier requesting switch over to new machine - watch outs?
Replies
3
Views
192
tygerdawg
tygerdawg
PlasticNoob69
  • Locked
  • Question
Is there a method to laminate Polyethylene Terephthalate (PET)?
Replies
2
Views
332
PlasticNoob69
PlasticNoob69

Part and Inventory Search

Sponsor

Back
Top Bottom