Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Perpendicularity measuring 2
- Thread starter SeasonLee
- Start date
- Thread starter
- #21
Thanks again,Harold.
The picture is pretty clear, and the method is very practical, its really give me a great help, I am trying to give a second star but limited by the system. Anyway, thanks for all inputs.
nithinku
Here is the thread of GD&T differences between ISO and ASME.
SeasonLee
The picture is pretty clear, and the method is very practical, its really give me a great help, I am trying to give a second star but limited by the system. Anyway, thanks for all inputs.
nithinku
Here is the thread of GD&T differences between ISO and ASME.
SeasonLee
Frank,
Good point, it is not retroactive as each standard is accompanied by a release date, just like Y14.5; it can be Y14.5M-1994 or Y14.5-2009 or ...
Jim Sykes, P.Eng, GDTP-S
Profile Services TecEase, Inc.
Good point, it is not retroactive as each standard is accompanied by a release date, just like Y14.5; it can be Y14.5M-1994 or Y14.5-2009 or ...
Jim Sykes, P.Eng, GDTP-S
Profile Services TecEase, Inc.
- Status
Similar threads
- Question
- Locked
- Question