Permeable Reactive Treatment Wall 1

[Enviro97]

I am looking for some information in the effectiveness of Permeable reactive treatment wall/passive wall in treating metals like aluminum, arsenic, iron, lead, manganese, nickel. Anybody with experience in these, plase share your views.

 

[mbph]

http://www.cluin.org/techfocus/default.focus/sec/Permeable_Reactive_Barriers/cat/Overview/

 

[Enviro97]

Thanks mbph

 

[mitchell54]

http://www.prb-net.org/

I have a some knowledge of this topic, I did reasearch on this in school, I also have some field experience in the installtion. If you have more specific questions I will be able to assist.

There are a ton of web sights involving these technologies. Do a web search on permeable reactive barriers.

good luck.

 

[Enviro97]

Thanks Mitchell54. I am looking to design PRB for BTEX contaminants and some metals (not Chromium). Can you please suggest some case studies on that.

you help is greatly appreciated.

 

[Enviro97]

BTW Mitchell54, the web site you referred was very useful. Thanks again.

 

[jvvenkat]

Is there a way to treat both VOC's and inorganics with a single permeable wall (with 2 different reactive media)? any suggestions would be helpful.

Thanks.