Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Performing Clash test on a gear

  • Thread starter Thread starter Amans_workbench
  • Start date Start date
A

Amans_workbench

Guest
In this tutorial I have explained how to perform clash test on a gear assembly to check the occurrence of interference during power transmission.

 

Attachments

  • PicsArt_09-06-03.12.01.jpg
    PicsArt_09-06-03.12.01.jpg
    527.4 KB · Views: 1
You must log in or register to reply here.

Similar threads

howdyitssam
  • Locked
  • Question Question
Clash analysis not detecting clash
Replies
1
Views
407
howdyitssam
howdyitssam
CAD2015
  • Question Question
3DEXPERIENCE - Catia on cloud.........
Replies
4
Views
6K
Azzazil
Azzazil
Eisengrindt
  • Locked
  • Question Question
Creating a pad on inclined side surfaces
Replies
2
Views
508
Wuzhee
Wuzhee
U
  • Locked
  • Question Question
Point on curve on min curvature radius
Replies
4
Views
2K
ulitsakalarash
U
M
Is a parametric gear design producible ?
Replies
8
Views
5K
Mans
M

Part and Inventory Search

Sponsor

Back
Top