Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Percentage of horse power used in a 6 or 8 Cly Engine Valve train.

Status
Not open for further replies.

Lenny123

Mechanical
Apr 25, 2007
14
I need to know about how much horse power is needed to power either a 6 or 8 cly gas engins valve train.Both Intake and Exhaust valves. Say 4 valves per cly. I need this as a percent.

Lenny123
 
Replies continue below

Recommended for you

No way to answer, how many cams, compression ratio, valves/cykinder, BMEP, spark v disel, and on...
 
Your right,I should have been more spcific with my question.
Theres a bunch of specs on this website for a small block V8 engine.

4 valves per cly using 4 over head cams.

If you happen to have the answer using another engine size, please feel free to post it here.
 
What for? lossen the valve springs to save HP to the valve train, but suffer HP loss when valves "float". It's a trail and error game. Eventually you could run enough combinations to write your own equation taking into account springs, cam lift, rpm, CR, fuel....
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor