alighavam
Petroleum
- Aug 13, 2012
- 1
knows any body about this product (penumatic controller model 58 foxboro) how its works? i need some information .![[ponder]](/data/assets/smilies/ponder.gif "[ponder] [ponder]")
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations JAE on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
penumatic controller model 58 foxboro 1
- Thread starter alighavam
- Start date
- Status
-
1
- #2
The book, Instrumentation Training Course: Pneumatic Instruments Vol 1, (brown paperback cover) published by Howard Sams and copyrighted in 1968 has a 3 page chapter on the Foxboro controller. But it assumens that the reader understands what a true force balance controller is; that topic along with other pneumatic fundamentals, having been covered in earlier sections.
Copies routinely show up on the used book sites for $1.00 plus postage.
If you go to look for it, make sure it's pneumatic, Vol 1, because the same title had subtitle Vol 1: Electronic Instruments with the green cover.
Copies routinely show up on the used book sites for $1.00 plus postage.
If you go to look for it, make sure it's pneumatic, Vol 1, because the same title had subtitle Vol 1: Electronic Instruments with the green cover.
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question
- Locked
- Question