Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Peak Temperature under Sunburn

Status
Not open for further replies.

yshij

Aerospace
Jun 11, 2002
21
WE WOULD LIKE TO KNOW HOW HIGH TEMPERATURE CAN GO ON A BLACK-PAINTED SURFACE IN A BIG OPEN AREA UNDER SUNBURN? CAN IT BE HIGHER THAN 175F?

THANKS
 
Replies continue below

Recommended for you

Hello,
This may not be your answer,but I know that design temperature for a plastic part in a car room,is 90 deg. C .
this is for a black plastic part during hot summer when all windiws are closed.i hope this answer help you.
 
In analyzing failures of fire-retardant treated plywood roofs, it was found that roof surfaces under dark shingles in open sun in the southern part of the US reached 150-160 deg F.
FRT wood is tested at that temp to establish strength degradation factors.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor