Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

PD5500 Maximum branch to body thickness ratio

Status
Not open for further replies.
MCHIU

MCHIU

Mechanical
Joined
Jun 11, 2019
Messages
1
Location
GB
Hi,
I hope I am not repeating this question. If I have, please point me to the right link. Thank you!

Anyway my question is in relation to section 3.5.4.9.2(a)(3). Does anyone knows how the limits for Figure 3.5-31 in PD5500 is derived from?

Thank you in advance.
 
Status
Not open for further replies.

Similar threads

mariolucas75
  • Question Question
thickness tolerance of piping Vs plates
Replies
1
Views
7K
MJCronin
MJCronin
JoshRanch
  • Question Question
ISO Tanker Repairs Code and Inspection body
Replies
0
Views
3K
JoshRanch
JoshRanch
MechEngD
  • Locked
  • Question Question
PD5500 Branch vs Nozzle
Replies
2
Views
525
BJI
BJI
Aloni
  • Locked
  • Question Question
Welding inconel 800 ring to 516gr70 body flange
Replies
8
Views
673
CuMo
CuMo
torsani
  • Locked
  • Question Question
Table UW-16.1 manufacture's fitting thickness
Replies
2
Views
2K
IdanPV
IdanPV

Part and Inventory Search

Sponsor

Back
Top