Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

pcmk/a to plc2/16

Status
Not open for further replies.
reebelec

reebelec

Industrial
Joined
Sep 28, 2001
Messages
18
Location
CA
I'm having a problem with getting a pcmk/a card to work with a plc2/16.
I followed the technote about modifying the config.sys file with no luck so far. I have tried the list of memory ranges listed by AB
Any help would be appriciated
 
Sort by date Sort by votes
I once had a problem in which the card would not communicate to any of my compatible devices. It took a registry edit to clean out the old entries so the new correct ones could load. This was on Windows NT.

Maybe there is a related tech. note in your case?
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Lucianmwm
  • Locked
  • Question Question
Power and temperature oscillation, between Power range 55% to 75%, CAT CG260/16
Replies
0
Views
745
Lucianmwm
Lucianmwm
KGisME
  • Locked
  • Question Question
Help a non-PLC guy with this control application
Replies
14
Views
5K
KGisME
KGisME
Azam1985
  • Locked
  • Question Question
how to make Wibu dongle backup
Replies
0
Views
654
Azam1985
Azam1985
vivekigles
  • Locked
  • Question Question
Need to set a pre loaded load cell value to zero in PLC.
Replies
1
Views
446
xnuke
xnuke
robinbreak
  • Locked
  • Question Question
A very simple PLC application & zero budget for hardware ??
Replies
7
Views
2K
seanleed
seanleed

Part and Inventory Search

Sponsor

Back
Top