PCB mounting hardware

[zappedagain]

I have a PCB that I need to right-angle mount to a front panel. Does anybody have any recommendations for PCB mounting hardware vendors?

I expect I'll end up with a rectangular cube that is about 0.25" (6 mm) square and 0.5" (12 mm) long with a hole tapped in one end and on one side. Something like a Keystone 1647 (

http://www.keyelco.com/pdfs/p61.pdf)

could work; I'm not thrilled with the length or the tap size so I'm looking for other options.

In a previous life (job) I knew of a company who produced things like this. I'll post that vendor once I find/remember their name.

Vertical standoffs are fairly easy to come by; any mechanical vendor like McMaster-Carr or Grainger has a lot to offer.

Thanks,

 

[telecomguy]

Are you familiar with the R'Angle fasteners from PEM?

<tg>

 

[zappedagain]

Thanks, those are new to me. PEM has several interesting optiosns for PCB mounting.