Feb 7, 2002 #1 TCN Electrical Joined May 12, 2003 Messages 3 Location IT switched mode psu 5v 12v- 12v+ 3v no output except brief pulse (causes fan to move) every 10 -15 seconds pwm chip is ml4824cp anyone got pinouts?? Checked for dried up electrolytics and any obvious hr and dry joints any ideas???
switched mode psu 5v 12v- 12v+ 3v no output except brief pulse (causes fan to move) every 10 -15 seconds pwm chip is ml4824cp anyone got pinouts?? Checked for dried up electrolytics and any obvious hr and dry joints any ideas???
Feb 7, 2002 #2 melone Electrical Joined Aug 10, 2001 Messages 1,233 Location US Could the power supply be going into short-circuit/over-current protection? Upvote 0 Downvote
Feb 9, 2002 #3 MMAshwin Computer Joined Apr 26, 2001 Messages 132 Location GB Hi, Have you tried disconnecting everything to make sure its not being loaded (including fan). As for those pin outs try http://www.fairchildsemi.com/ds/ML/ML4824-1.pdfhttp://www.fairchildsemi.com/ds/ML/ML4824-2.pdf Any help ?, yes no let me know. Regards Upvote 0 Downvote
Hi, Have you tried disconnecting everything to make sure its not being loaded (including fan). As for those pin outs try http://www.fairchildsemi.com/ds/ML/ML4824-1.pdfhttp://www.fairchildsemi.com/ds/ML/ML4824-2.pdf Any help ?, yes no let me know. Regards