franckelim
Mechanical
- Aug 1, 2013
- 1
Hi all,
I would like to change my Unigraphics working station.
My supplier advise for this config:
1x Intel i5 3470 Quad Core Tray
1x Intel Cooler 1155/1156 Up to 95W Copper
1x Gigabyte GA-H77M-D3H GH77MD3H 3
2x Kingston 8GB 1600MHz DDR3 HyperX Blue
1x Sandisk SSD 128GB 2.5" Sata3
1x Seagate 1TB 3.5" Sata2 7200 32MB
1x LG DVD-RW x24 Sata
1x PNY Quadro 600 1GB PCIE Retail
1x Ippon S1 USB 3.0
1x Thermaltake ST 600W Litepower A.PFC
1x 23" Dell Screen
Do you think this configuration optimal for mechanical design on UG?
I would like to change my Unigraphics working station.
My supplier advise for this config:
1x Intel i5 3470 Quad Core Tray
1x Intel Cooler 1155/1156 Up to 95W Copper
1x Gigabyte GA-H77M-D3H GH77MD3H 3
2x Kingston 8GB 1600MHz DDR3 HyperX Blue
1x Sandisk SSD 128GB 2.5" Sata3
1x Seagate 1TB 3.5" Sata2 7200 32MB
1x LG DVD-RW x24 Sata
1x PNY Quadro 600 1GB PCIE Retail
1x Ippon S1 USB 3.0
1x Thermaltake ST 600W Litepower A.PFC
1x 23" Dell Screen
Do you think this configuration optimal for mechanical design on UG?
