Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Patran Mesh Creation

Status
Not open for further replies.
xydas7

xydas7

Mechanical
Joined
Dec 4, 2009
Messages
3
Location
GB
Hi guys just should say that this forum is awesome. Now

I am a patran newbie and I am currently analysing a simple beam fixed on the one side and with a load on the other end. I am experimenting with various meshing types (to see which one is more accurate) as part of an exercise and I am trying to create a 45 degree parallelogram mesh for the FEA. Could someone enlighten me on how to do this?

Thank you in advance for your time.

Regards
Alex
 
Status
Not open for further replies.

Similar threads

Carlo Alberto
  • Locked
  • Question Question
Patran Problems
Replies
4
Views
1K
Onda
Onda
Mohamed Mowafy
  • Locked
  • Question Question
MSC Patran Subcases issue
Replies
2
Views
1K
Mohamed Mowafy
Mohamed Mowafy
MihaelaN
  • Locked
  • Question Question
Threaded connections modelling with frictional contact in Patran/ Nastran
Replies
0
Views
2K
MihaelaN
MihaelaN
gandoglassy
  • Locked
  • Question Question
Combine several cross-sections with Patran arbitrary shape tool (Beam Library)
Replies
0
Views
695
gandoglassy
gandoglassy
MihaelaN
  • Locked
  • Question Question
Shock Response Spectrum Analysis Patran/ Nastran
Replies
0
Views
638
MihaelaN
MihaelaN

Part and Inventory Search

Sponsor

Back
Top