Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Password protection on Omron PLCs 1

Status
Not open for further replies.

ClifBRD

Electrical
Joined
Sep 29, 2010
Messages
1
Location
US
I am unable to B/U program in CJ1M CPU13. password protection was enabled. Does anyone know another way around this?
 
We had this problem on a Omron CQM1, manufacturer had put in the password, we had to take it to the local omron office, and have a coffee while they looked at it- they brought it back 10mins later cracked.

I suspect they did 1 of 2 things;
1, Had a backdoor code.
2, Bruteforced it, by running a program that generated the necessary 4 digits(numerical).

As I recall the codes had a special section of data memory map.

We also once had to apply a code to a customer that did not pay- and a fallover timer of a year- payment resulted in a service call where the code and timer were removed.

Regards

Satblefordd
 
I have software for remove protection in some Omron PLC.The name is Passremover, work ok, it`s free. Do you want this software?, i can send this program for email.
Best Regards
 
HOW CAN I GET THIS SOFTWARE , I AM HAVING THE SAME PROBLEM
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top