parts display as intersecting

[uGlay]

hey guys i have a problem with my SW. My parts are showing all jagged and intersecting with each other. I'm having trouble remembering how to correct this.

Any small contributions towards the right direction are appreciated.

UGLAY

SW2010 Premium SP0.0
Intel Core 2 Duo CPU
2.2GHz, 2.00GB RAM
QuadroFX 3700
SpacePilot

 

[uGlay]

SW2010 SP4.0

SW2010 Premium SP0.0
Intel Core 2 Duo CPU
2.2GHz, 2.00GB RAM
QuadroFX 3700
SpacePilot

 

[uGlay]

Large Assy Mode is off, but im using lightweight components heavily.

SW2010 Premium SP0.0
Intel Core 2 Duo CPU
2.2GHz, 2.00GB RAM
QuadroFX 3700
SpacePilot

 

[Updraft]

First, try setting components to resolved.

- - -Updraft

 

[uGlay]

if i resolve everything the quality of edges is marginally better and the computer just gets borderline locked up cause its too much to handle.



SW2010 Premium SP0.0
Intel Core 2 Duo CPU
2.2GHz, 2.00GB RAM
QuadroFX 3700
SpacePilot

 

[uGlay]

and i havent even added the hardware yet.

SW2010 Premium SP0.0
Intel Core 2 Duo CPU
2.2GHz, 2.00GB RAM
QuadroFX 3700
SpacePilot

 

[CorBlimeyLimey]

Adjust settings at Tools > Options > Document Properties > Image Quality

 

[ctopher]

Check your card driver?

https://www.solidworks.com/sw/support/videocardtesting.html

Chris
SolidWorks 10 SP4.0
ctopher's home
SolidWorks Legion

 

[CorBlimeyLimey]

Suppress unneeded sub assys while working on others.

Increase RAM and enable /3GB switch.

 

[uGlay]

video card checks out fine

SW2010 Premium SP0.0
Intel Core 2 Duo CPU
2.2GHz, 2.00GB RAM
QuadroFX 3700
SpacePilot

 

[ctopher]

Tools/Options/Document Properties/Image Quality

Chris
SolidWorks 10 SP4.0
ctopher's home
SolidWorks Legion

 

[SolidWorksEngineer]

Hello,

Does you allowed RAM to a Virtual Memory use..

My Computer, Right mouse button, Properties....

See Picture....1

http://files.engineering.com/getfile.aspx?folder=7721279a-f9c9-4608-b202-1b9470531bd0&file=1.jpg

win XP has there some sentens.... "allowed 100% to use Virtual memory" Something simila... I don`t remember so good..


see pic 2 allso... the result must be similar

http://files.engineering.com/getfile.aspx?folder=d3c346b8-e102-4dad-91da-f014c2d76c17&file=2.jpg

If all is same, like my pictuser, then like "ctopher" say: Tools/Options/Document Properties/Image Quality

http://solidworksengineer.com

 

[uGlay]

SWengineer. thanks for the images. my settings are just like yours. i played with tesselation settings in the image quality settings and it improved a bit. thanks for the help guys.

SW2010 Premium SP0.0
Intel Core 2 Duo CPU
2.2GHz, 2.00GB RAM
QuadroFX 3700
SpacePilot