Mar 17, 2005 #1 kotawsu Mechanical Dec 26, 2004 76 just like in abaqus is there a partitioning technique available in NE Nastran?
Mar 18, 2005 #2 fkmeyers Aerospace Nov 16, 2004 115 Can you expand on partitioning technique. Please explain further. Upvote 0 Downvote
Mar 18, 2005 Thread starter #3 kotawsu Mechanical Dec 26, 2004 76 partioning is diving a solid model into simpler and smaller regions to facilitate meshing. I figured out its called slice solid in nastran.. Upvote 0 Downvote
partioning is diving a solid model into simpler and smaller regions to facilitate meshing. I figured out its called slice solid in nastran..
Mar 18, 2005 #4 ProbaSci Bioengineer Sep 23, 2004 43 I'm assuming that you are using FEMAP with NE: Use the geometry > solid > slice match to section into parts, then mesh with linked surfaces. http://www.probasci.com - Implantable FEA for medical device manufacturers Upvote 0 Downvote
I'm assuming that you are using FEMAP with NE: Use the geometry > solid > slice match to section into parts, then mesh with linked surfaces. http://www.probasci.com - Implantable FEA for medical device manufacturers
