Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Part L Building Regulations, U values - Help wanted

Status
Not open for further replies.
JTDTimberframe

JTDTimberframe

Structural
Joined
Dec 7, 2005
Messages
8
Location
GB
Does anyone in here deal with Buildings and Insulation of buildings?

I'm looking for a good text on Part L of the British Building Regs and how to calculate in general terms, i.e. what the philosophy / intent is.

Any and all help gratefully received

Stephen Napper BEng(Hons) AMIMechE
 
Status
Not open for further replies.

Similar threads

A
  • Locked
  • Question Question
Advice On U-Values In Thermal Junctions... I Think I'm Doing It Wrong
Replies
0
Views
717
Alpherbiuss
A
gigaspan
  • Locked
  • Question Question
ASME I Part PTFH need PSV
Replies
1
Views
451
georgeverghese
georgeverghese
L
  • Locked
  • Solved
Dear all: what type of evaporatir should be used for caustic soda concentration up to 50%? Forced circulation or falling film?
Replies
10
Views
5K
pierreick
pierreick
AaronH
  • Question Question
FEA analysis with thermal loads
Replies
3
Views
8K
Stick.
Stick.
kwisatz_haderach
  • Locked
  • Question Question
Should LMTD be used in calculating heat load?
Replies
1
Views
385
IRstuff
IRstuff

Part and Inventory Search

Sponsor

Back
Top