Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Part Families Importable Option

Status
Not open for further replies.
socialcad

socialcad

Mechanical
Joined
Jan 28, 2012
Messages
16
Location
US
Is there any setting to make the "Importable Part Family Templates" option off or unselected in NX 7.5.5 by default in the Part Family dialog?
 
Sort by date Sort by votes
Modeling>General>Miscellaneous>Imortable Part Family Template (toggle)
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Befuddled
  • Locked
  • Question Question
Part Families - Threads (symbolic . Detailed)
Replies
2
Views
1K
Toost
Toost
CAD2015
  • Question Question
Crosshatch (solid option)...............
Replies
2
Views
7K
CAD2015
CAD2015
A
  • Locked
  • Question Question
Has anyone attempted to use Animation Designer and Part Families on the same file?
Replies
1
Views
3K
Kenja824
Kenja824
nyang
  • Question Question
Moving body from part back to assembly level part
Replies
3
Views
12K
Toost
Toost
CAD2015
  • Question Question
Convert components from an assembly into one single part.......
Replies
5
Views
7K
CAD2015
CAD2015

Part and Inventory Search

Sponsor

Back
Top