dbvanhorn
Electrical
- May 22, 2014
- 3
I'm familiar with using parasitic elements out away from the driven element as directors or reflectors.
I have seen an antenna that used a parasitic element close in to the driven element. For example if the DE were 1/8" wire then the PE would also be 1/8" wire spaced maybe 1/8" away.
The DE induces current flow in the PE, but does this actually improve radiation, or just double the loss?
I have seen an antenna that used a parasitic element close in to the driven element. For example if the DE were 1/8" wire then the PE would also be 1/8" wire spaced maybe 1/8" away.
The DE induces current flow in the PE, but does this actually improve radiation, or just double the loss?