progressivedieguy
Mechanical
Does anyone know how I can have a file find the overall length, width and height of a file an have it input in my BOM. Thanks !!!!!
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Parameters for finding overall length, width and height
- Thread starter progressivedieguy
- Start date
- Status
glassmaker
Automotive
Use behavioral modeling to create the parameters you need.
- Thread starter
- #3
progressivedieguy
Mechanical
Were do you find behavioral modeling???
Expert machinist can give you the box size that your part will fit into. Haven't tried it yet to know how to get the values out to a BOM or as parameters.
"Wildfires are dangerous, hard to control, and economically catastrophic."
"Fixed in the next release" should replace "Product First" as the PTC slogan.
Ben Loosli
CAD/CAM System Analyst
Ingersoll-Rand
"Wildfires are dangerous, hard to control, and economically catastrophic."
"Fixed in the next release" should replace "Product First" as the PTC slogan.
Ben Loosli
CAD/CAM System Analyst
Ingersoll-Rand
- Status
Similar threads
- Locked
- Question
- Locked
- Question