Parameter from relation

[smocken]

Hi.

How to create relation to add á components dimension to one paramter like below.

Parameter_SIZE: Length(D1) x Width(d2) x Height(d3)

Example in paramter field:
30x20x5

 

[looslib]

You will need a complex relation that usues the istr function, Integer to String.
You will need to convert each parameter to a string, then build your final string to put it back together.


"Wildfires are dangerous, hard to control, and economically catastrophic."

Ben Loosli

 

[smocken]

Hi and thanks.

In relation i thought this shuóuld work esealy. "x" is text only
Parameter_SIZE=d1 x d2 x d3

I now how to do it width more parameters but i did think is could be done with only one paramter.

Can ju give me an example with istr function?

 

[looslib]

I had the function wrong, it is ITOS.
Parameter Length = 5.5 this code will set Title_2_2 to 'X 5.5 LONG'
Parameter Length = 3.0 this code will set Title_2_2 to 'X 3 LONG'


IF LENGTH - FLOOR(LENGTH) == 0
TITLE_2_LEN = "0"
ELSE
TITLE_2_LEN = ITOS((LENGTH - FLOOR(LENGTH))*10)
ENDIF

TITLE_2_2 = " X " + ITOS(FLOOR(LENGTH)) + "." + TITLE_2_LEN + " LONG "


"Wildfires are dangerous, hard to control, and economically catastrophic."

Ben Loosli