Eng-Tips is the largest forum for Engineering Professionals on the Internet.

Members share and learn making Eng-Tips Forums the best source of engineering information on the Internet!

  • Congratulations JStephen on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Paper space viewport problem

Status
Not open for further replies.

chicopee

Mechanical
Joined
Feb 15, 2003
Messages
6,199
Location
US
I work with ACAD 2004. When scaling objects in one or more viewports in a layout, all viewports will atomatically undergo a zoom all making it impossible to scale objects within all viewports. Is there a command which will prevent this occurence.
 
Have you "locked" the view in each viewport?
 
Check the UCSFOLLOW system variable, I forget whether you want it to be 0 or 1...
 
Locking the view did work and I am familiar with that command, however, I should not have to invoke that command. Unfortunately the original drawing was not mine so I have no idea what was done.
I'll check out the UCSfollow system variable.
Thanks for the replies.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top