Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

PAA Etch/Anodize and BR127 Primer

Status
Not open for further replies.
MStiller

MStiller

Aerospace
Joined
Sep 20, 2007
Messages
40
Location
US
My company is looking to bond a number of aluminum parts onto carbon fiber parts we are producing, and we're looking for company in the new england area (we're located in Boston) that can do both the Phosphoric Acid Anodization and the BR127 Bond Primer. Anyone know of anyone that can do this? This process is the same as Boeing's BAC5555, which conforms to ASTM3933.

Thanks guys and gals
 
Status
Not open for further replies.

Similar threads

david339933
  • Locked
  • Question Question
Epoxy Zinc Primer Burnish
Replies
6
Views
1K
david339933
david339933
ipi
  • Locked
  • Question Question
Zinc rich primer Vs Zinc Rich epoxy
Replies
16
Views
2K
dik
dik
NorthCivil
  • Locked
  • Question Question
acrylic paint primer to bitumen membrane (torch on roofing type)
Replies
0
Views
255
NorthCivil
NorthCivil
JoelTXCive
  • Locked
  • Question Question
Need to Paint a Pipe - SSPC Spec? and Paint Type
Replies
13
Views
2K
SJones
SJones
mectarek
  • Locked
  • Question Question
surface roughness and cleaness
Replies
2
Views
442
david339933
david339933

Part and Inventory Search

Sponsor

Back
Top