Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
P Delta
- Thread starter eit09
- Start date
JoshPlumSE
Structural
There is little significance to that.
But, if you're using ASD wood design or the older AISC 9th edition steel design, you are not required to do P-Delta.
Newer codes (AISC 13th ASD) require P-Delta. Perhaps, the program should change that so that it always requires P-Delta when using the LC generator.
But, if you're using ASD wood design or the older AISC 9th edition steel design, you are not required to do P-Delta.
Newer codes (AISC 13th ASD) require P-Delta. Perhaps, the program should change that so that it always requires P-Delta when using the LC generator.
- Status
Similar threads
- Locked
- Question
- Locked
- Question
