Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

P&ID simulator

Status
Not open for further replies.
EngMic07

EngMic07

Petroleum
Joined
Oct 14, 2011
Messages
8
Location
SG
Hi All,

Did your guys using any good P&ID simulator for process calculation and simulation?

Please share.

BS
 
Sort by date Sort by votes
I've used this before:
The big name in simulation, of course, being Matlab, which is very expensive. I've also used GNU Octave, which is more matlab compatible.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

BF3_Counter
  • Locked
  • Question Question
P&ID symbol for Dual-Speed Pump
Replies
1
Views
3K
georgeverghese
georgeverghese
kikonas68
  • Locked
  • Question Question
P&ID for DHW with solar collector
Replies
4
Views
856
Alan3232
Alan3232
tsenne
  • Locked
  • Question Question
P&ID symbol for Internal Fire Safety Valve with Fusible Link
Replies
2
Views
1K
ProSafPlant1
ProSafPlant1
MuZZyyy
  • Locked
  • Question Question
20,000 PSI System Odd PID Loop Behavior. Ideas
Replies
0
Views
563
MuZZyyy
MuZZyyy
constantlylearning
  • Question Question
Question About Intrinsically Safe Installation to Monitor Propane Levels Using R3D Sensor
Replies
1
Views
3K
hacksaw
hacksaw

Part and Inventory Search

Sponsor

Back
Top