Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Ozone detector?

Status
Not open for further replies.

dave11282

Electrical
Joined
May 17, 2005
Messages
21
Location
GB
Hi all

I need an ozone sensor with a 4-20mA output to PLC

please can anyone recommend any UK maufactures'/suppliers

thanks
 
There is a company in Germany that I have used for high concentration (up to 300 mg/SL) in slaving an ozone generator to a municipal water process. I understand that that they have a full range of atmospheric monitors too ("smog" or similar application), depending on your need.
They use the Beer-Lambert method and UV absorption, so it will detect ozone, smoke, and "paint fumes" about the same.

There are electrochemcial sensors also, that are less expensive if you are looking to measure atmospheric ozone. The only downsides are there is a chemical cannister that will require periodic replacement, and the sensor will be responsive to (and depleted by) any oxidizer: chlorine, NOx, and or course ozone. I don't know of any European suppliers of these. In the USA:
... and I am sure they have some local representation in the UK.

If you are looking to measure ozone dissolved in water, I have another set of recommendations, but only USA manufacturers, sorry. ATI (above) have some good ones, and again they are locally repped.

Good luck from across the pond. (Just in case you don't get local responses.)
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top