Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Outside thread
- Thread starter rpjd
- Start date
Hi,
when the list is empty it indicates that no matching
thread within hole.txt is found. Either you add that
thread to the holes.txt or change the diameter which
has to be done to solve you problem: the correct
diameter is 0.375 and the list will show a couple of
suitable treads
dy
when the list is empty it indicates that no matching
thread within hole.txt is found. Either you add that
thread to the holes.txt or change the diameter which
has to be done to solve you problem: the correct
diameter is 0.375 and the list will show a couple of
suitable treads
dy
- Status