Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations LittleInch on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Output of SHELL43 & SOLID65

Status
Not open for further replies.
Ahmedarhman

Ahmedarhman

Structural
Joined
Sep 6, 2014
Messages
10
Location
EG
I am dealing with modeling a composite section using these two kind of elements
and the output is in terms of stress. Can we produce the moment (Total) subjected to that section (like section-cut in sap & etabs as an example).
regards,
 
Status
Not open for further replies.

Similar threads

O
  • Question Question
Simulation of a screw connexion
Replies
1
Views
4K
dgeesaman
dgeesaman
nashki
  • Locked
  • Question Question
UDL on the Curve of Elbow
Replies
0
Views
3K
nashki
nashki
T
  • Question Question
Accessing Named Selections of Contact Surfaces via CMSEL After Applying Condensed Geometry Not Possible
Replies
0
Views
5K
TOM1345
T
R
  • Locked
Guidance on Settlement Analysis of Steam Generator in Oil Plant Using ANSYS
Replies
0
Views
815
Rabea-19
R
Faraz1997
  • Locked
  • Question Question
How to reduce number of iterations in tabular data of transient thermal analysis
Replies
3
Views
1K
NRP99
NRP99

Part and Inventory Search

Sponsor

Back
Top