Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Output of SHELL43 & SOLID65

Status
Not open for further replies.
Ahmedarhman

Ahmedarhman

Structural
Sep 6, 2014
10
I am dealing with modeling a composite section using these two kind of elements
and the output is in terms of stress. Can we produce the moment (Total) subjected to that section (like section-cut in sap & etabs as an example).
regards,
 
Status
Not open for further replies.

Similar threads

O
  • Question
Simulation of a screw connexion
Replies
1
Views
3K
dgeesaman
dgeesaman
nashki
  • Question
UDL on the Curve of Elbow
Replies
0
Views
3K
nashki
nashki
T
  • Question
Accessing Named Selections of Contact Surfaces via CMSEL After Applying Condensed Geometry Not Possible
Replies
0
Views
2K
TOM1345
T
R
Guidance on Settlement Analysis of Steam Generator in Oil Plant Using ANSYS
Replies
0
Views
674
Rabea-19
R
Faraz1997
  • Locked
  • Question
How to reduce number of iterations in tabular data of transient thermal analysis
Replies
3
Views
853
NRP99
NRP99

Part and Inventory Search

Sponsor

Back
Top Bottom