Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Origin of 4 grounds per mile

Status
Not open for further replies.
magoo2

magoo2

Electrical
May 17, 2006
857
This is a U.S. practice related question. The National Electrical Safety Code (NESC) has a requirement of 4 grounds per mile for 4-wire multi-grounded neutral systems. Does anyone know where the 4 grounds per mile came from?
 
Status
Not open for further replies.

Similar threads

Chopsider
  • Locked
  • Question
Identification of pressure switch operating range
Replies
3
Views
774
Chopsider
Chopsider
Engineer2021
  • Locked
  • Question
Ship electrical earth resistance value of 0.1ohm 1
Replies
4
Views
1K
Gr8blu
Gr8blu
trolex
  • Locked
  • Question
Class I, Division 2, rated accesories inside of typical NEMA 4X enclosure
Replies
2
Views
970
trolex
trolex
BMac57
  • Locked
  • Question
Adding 480V to Building
Replies
2
Views
1K
waross
waross
rkvbobby123
  • Locked
  • Question
Calibration of DC Shunts ranging from 1 mOhms to 10kOhms; Standard these can be calibrated to.
Replies
0
Views
656
rkvbobby123
rkvbobby123

Part and Inventory Search

Sponsor

Back
Top Bottom