Eng-Tips is the largest forum for Engineering Professionals on the Internet.

Members share and learn making Eng-Tips Forums the best source of engineering information on the Internet!

Register Log in
  • Congratulations JStephen on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Calibration of DC Shunts ranging from 1 mOhms to 10kOhms; Standard these can be calibrated to.

Status
Not open for further replies.
rkvbobby123

rkvbobby123

Electrical
Joined
Nov 18, 2014
Messages
26
Location
US
I am at a lab that calibrates these shunts but does not list the standard these are calibrated to.
Does IEEE have a standard that the Lab must follow to assure compliance.
 
Status
Not open for further replies.

Similar threads

BMac57
  • Locked
  • Question Question
Adding 480V to Building
Replies
2
Views
2K
waross
waross
KH LEE
  • Locked
  • Question Question
NEC standard for Nipple
Replies
1
Views
1K
waross
waross
Chopsider
  • Locked
  • Question Question
Identification of pressure switch operating range
Replies
3
Views
1K
Chopsider
Chopsider
Engineer2021
  • Locked
  • Question Question
Ship electrical earth resistance value of 0.1ohm
Replies
4
Views
2K
Gr8blu
Gr8blu
trolex
  • Locked
  • Question Question
Class I, Division 2, rated accesories inside of typical NEMA 4X enclosure
Replies
2
Views
1K
trolex
trolex

Part and Inventory Search

Sponsor

Back
Top