Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations LittleInch on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Orifice flow correction factors

Status
Not open for further replies.
1powerO

1powerO

Mechanical
Joined
Mar 6, 2005
Messages
1
Location
AU
Where can I find data on flow correction factors for square edged orifices, based on pipe diameter, beta ratio etc.?
Thanks.
 
Sort by date Sort by votes
The square-edged orifice arithmetic is really well described in API 14.3 (also known as AGA 3). All of the legal corrections are included there.

David
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

V
  • Locked
  • Question Question
Pipe misalignment correction
Replies
3
Views
2K
shvet
shvet
W
  • Question Question
Orifice for dump line to liquid tank
Replies
10
Views
9K
Whatsanolet
W
L
  • Locked
  • Question Question
Calculation of Orifice Diameter for Flow Restrictor (OF) in a Semiconductor Vertical Furnace System
Replies
7
Views
5K
georgeverghese
georgeverghese
E
  • Question Question
Potential for hydraulic transients with liquid restriction orifice isenthalpic expansion
Replies
12
Views
1K
goutam_freelance
goutam_freelance
AHickman
  • Locked
  • Question Question
Calculating flowrate out of orifice
Replies
14
Views
2K
Snickster
Snickster

Part and Inventory Search

Sponsor

Back
Top