Eng-Tips is the largest forum for Engineering Professionals on the Internet.

Members share and learn making Eng-Tips Forums the best source of engineering information on the Internet!

Register Log in
  • Congratulations dmapguru on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Orifice flanges 1

Status
Not open for further replies.
Leo165

Leo165

Chemical
Joined
Dec 2, 2009
Messages
26
Location
PK
While comparing flange taps and Corner taps, the only difference is tapping dimensions and orientation. The rest of orifice flange dimensions (flange thickness, hub diameter, length through hub etc) are same. Is it true ?

ahmad
 
Sort by date Sort by votes
Yes the dimensional data is the same. That is because they take a standard flange (size & rating) and just do additional modifications to it to make it a orifice flange or a corner tap flange.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

W
  • Question Question
Orifice for dump line to liquid tank
Replies
10
Views
9K
Whatsanolet
W
E
  • Question Question
Potential for hydraulic transients with liquid restriction orifice isenthalpic expansion
Replies
12
Views
1K
goutam_freelance
goutam_freelance
swearingen
  • Question Question
Can Standard Flanges Resist Full Bending Strength of Pipe?
Replies
7
Views
3K
swearingen
swearingen
KevinNZ
  • Locked
  • Question Question
Ordering socket weld flanges
Replies
11
Views
1K
LittleInch
LittleInch
Shahpar
  • Question Question
Ring Joint Flanges for 38 inch and larger size as per ASME B16.47 Series A
Replies
1
Views
3K
GD2
GD2

Part and Inventory Search

Sponsor

Back
Top