Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Option Tree Fonts not Clear
- Thread starter holyghost
- Start date
Hello holyghost,
You can zoom just like in any other window with the following mouse clicks:
[ol 1]
[li]position the cursor anywhere on the options tree;[/li]
[li]press and hold mouse button 2 (MB2) – the scroll wheel;[/li]
[li]press and release MB1 while keeping MB2 pressed;[/li]
[li]move the mouse up to zoom in;[/li]
[li]move the mouse down to zoom out.[/li]
[/ol]
Hope this helps,
Best of luck!
[small]
CATIA v5 — user & trainer
ANSYS — user (beginner)
[/small]
You can zoom just like in any other window with the following mouse clicks:
[ol 1]
[li]position the cursor anywhere on the options tree;[/li]
[li]press and hold mouse button 2 (MB2) – the scroll wheel;[/li]
[li]press and release MB1 while keeping MB2 pressed;[/li]
[li]move the mouse up to zoom in;[/li]
[li]move the mouse down to zoom out.[/li]
[/ol]
Hope this helps,
Best of luck!
[small]
CATIA v5 — user & trainer
ANSYS — user (beginner)
[/small]
- Thread starter
- #3
- Status
Similar threads
- Locked
- Question