Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

opening pro/e sends the CPU to 100%

  • Thread starter Thread starter jvf-design
  • Start date Start date
Status
Not open for further replies.
J

jvf-design

Guest
I have a problem with pro/e 2001, when I open it up, the CPU goes to 100% and will not come down, I must reboot becaue it is too slow. even when I shut down pro/e the CPU is 100% and other programs are slow. I have a fast machine and graphics card. I have a locked license on my computer. Any suggestions????
 
We had that problem about a year ago, turned out to be a bad video card. Card worked well for most other apllications, but as soon as Pro was fired up it soaked up cpu power. I think that a Promise card also caused some conflicts with Pro back then also. Hope this helps...
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top