Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Opening Internal Dialogs
- Thread starter AFloriani
- Start date
- Thread starter
- #2
I have found a way to open the configuration dialog for the Scaling and Mapping Express VI.
There is a VI stored in :
<LabView Path>\vi.lib\express\express arith-compare\ScaleandMapConfig.vi
I have added it to my block diagram using "Select a VI..." in "All Funcs".
The problem is that it needs 3 VI references as input (Parent VI, VI, SubVI). So the question is, how do I get the reference of each Scale and Map VIs I have in my block diagram to open the configurarion for the desired one?
And which are considered the Parent VI, VI and SubVI? Where do I get these other references from?
Please I need to solve this problem urgently.
Thanks in advance.
There is a VI stored in :
<LabView Path>\vi.lib\express\express arith-compare\ScaleandMapConfig.vi
I have added it to my block diagram using "Select a VI..." in "All Funcs".
The problem is that it needs 3 VI references as input (Parent VI, VI, SubVI). So the question is, how do I get the reference of each Scale and Map VIs I have in my block diagram to open the configurarion for the desired one?
And which are considered the Parent VI, VI and SubVI? Where do I get these other references from?
Please I need to solve this problem urgently.
Thanks in advance.
- Status