Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

One view in a drawing is missing parts of an assembly 1

Status
Not open for further replies.

esull111

Mechanical
Oct 14, 2010
2
US
I have a drawing with four views. The base view is not showing all of the parts in the assembly, but the other three views do show all of the parts. I have checked to make sure none of the components are suppressed, and that it is in the master representation. Does anyone have any ideas?
 
Replies continue below

Recommended for you

Are these missing parts imported files (step/iges) files by chance?
Is the associative view button checked? (The chain link looking icon in the edit view dialog)
Are these missing parts maybe reference parts?
Are you current on graphics card drivers?
Have you tried placing another base view of this assembly to see if the parts show up then?
 
They were step files and the associative view button was not checked. I checked it and everything is in all of the views now. Thanks for the help.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Top