Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

One setup for a range of loading conditions

Status
Not open for further replies.

Splint

Mechanical
Joined
Aug 6, 2008
Messages
6
Location
AU
Hi,

New Catia user here. I have a component which I want to perform static analysis using a number of different loading conditions. Each loading condition will be independent of the others so a series of analysis must be performed.

Can I set up one analysis with a number of different loading conditions but be able to suppress the all but the load of interest. This is to limit the meshing and restraint setup to one model.

Thanks
 
once your first static case is define simply go in menu Insert / Static Case and defined reference for Restraints (and new for Loads)


Eric N.
indocti discant et ament meminisse periti
 
So how do I switch back and forth between loading conditions? Is there a way of suppressing individual static cases?
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top