Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

on line resources 2

Status
Not open for further replies.

robinxie

Chemical
Joined
Nov 13, 2001
Messages
52
Location
CA
Could anyone provide some on line resources regarding desalter, furnace and any refinery equipment specifications/data sheets? Thanks a head.
 
hello,

one source can be the API, usually if you have a project the know-how provider will supply the datasheets.
equipment suppliers also can supply datasheets.

regards,
roker
 
I found that lead contractors and licensors websites (Foster Wheeler, UOP, as an example) are very valuable for self-training purposes. Again these could be achieved by consulting operative technical papers on the unit operations You mentioned (desalting, thermal cracking, distillation et cetera)
 
Thx a lot, PB500. Could you please indicate more contractors and licensors websits?
 
This is just a sample list, however due to strong concentration in the industry the following are nearly synonimous of a specialty segment

CRITERION CATALYSTS
IFP look at "IFP Knowledge Hub" in particular;

AXENS process units licensing for aromatics, middle distillates, et cet

CDTECH (ABB LUMMUS GLOBAL - CRI) process units for catalytic distillation of gasoline blends (by the way, also take a look at EPC work of SNAMPROGETTI

JGC CORPORATION for other unit processes

HALLIBURTON KBR for FCC, hydroprocessing and resid upgrading

SHELL GLOBAL SOLUTIONS
Personally, I have preferential interest in aromatics and heavies upgrading, so I also take into account
CHIYODA CORP TOJO ENGINEERING CORP TEC both at "Technology" section.
 
Thank you very much, PB500.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top