Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations JAE on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
on add to assembly deformable part loads with active deformation...
- Thread starter IvanNX
- Start date
Hi Ivan,
I know this little "bug"
Instead of using "OK" Button, You sould use "CANCEL" Button
Regards
Didier Psaltopoulos
I know this little "bug"
Instead of using "OK" Button, You sould use "CANCEL" Button
Regards
Didier Psaltopoulos
- Thread starter
- #3
Thank you Didier, this is good to know, but my problem is different.
I made deformable cable strap model so we can reuse it in different positions. It is model with routing/space reservation that is used to customize shape of strap in different positions and for different amount of cables strapped together. You place strap, go to deform component, edit routing spline by moving and/or add/remove points and you get different shapes of strap.
One of problems is that when placed in assembly it come with active deformation,
instead without any deformation.
And I can't figure out why is this happening.
_____________________________
Enjoy your work and have fun!
I made deformable cable strap model so we can reuse it in different positions. It is model with routing/space reservation that is used to customize shape of strap in different positions and for different amount of cables strapped together. You place strap, go to deform component, edit routing spline by moving and/or add/remove points and you get different shapes of strap.
One of problems is that when placed in assembly it come with active deformation,
instead without any deformation.
And I can't figure out why is this happening.
_____________________________
Enjoy your work and have fun!
- Status
Similar threads
- Locked
- Question
