Feb 23, 2009 #1 engcom Structural Jul 7, 2003 15 Does anyone know where I find section properties for W6 X 15.5. The steel section is no longer in the modern AISC Manuals.
Does anyone know where I find section properties for W6 X 15.5. The steel section is no longer in the modern AISC Manuals.
Feb 23, 2009 1 #2 Qshake Structural Jul 12, 2000 2,672 There is a FAQ in this forum regarding that kind of information. Several 6" by 15.5 are listed in the AISC Iron and Steel Beams 1873 to 1952. You may wish to check out slideruleera.net for such out of print texts and references. Regards, Qshake Eng-Tips Forums:Real Solutions for Real Problems Really Quick. Upvote 0 Downvote
There is a FAQ in this forum regarding that kind of information. Several 6" by 15.5 are listed in the AISC Iron and Steel Beams 1873 to 1952. You may wish to check out slideruleera.net for such out of print texts and references. Regards, Qshake Eng-Tips Forums:Real Solutions for Real Problems Really Quick.
Feb 23, 2009 1 #3 IFRs Petroleum Nov 22, 2002 4,676 I found a WF6x15.5 in an old Bethlehm Steel catalog from 1948. A=4.62 d=6.00 b=6.00 tf=0.269 tw=0.240 I=30.3 S=10.1 r=2.56 fillet radius=0.30, flange faces are parallel Upvote 0 Downvote
I found a WF6x15.5 in an old Bethlehm Steel catalog from 1948. A=4.62 d=6.00 b=6.00 tf=0.269 tw=0.240 I=30.3 S=10.1 r=2.56 fillet radius=0.30, flange faces are parallel
Feb 23, 2009 #4 nutte Structural May 26, 2006 819 Qshake: Where is there an FAQ? I didn't know there were any... Upvote 0 Downvote
Feb 23, 2009 #5 kslee1000 Civil/Environmental Jun 5, 2006 1,609 nutte: click on the FAQ tab on top of this page, Qshake has a post there related to this topic. Upvote 0 Downvote
Feb 23, 2009 #6 nutte Structural May 26, 2006 819 Ahh, thanks. I had never noticed the FAQs tab. Upvote 0 Downvote
Feb 24, 2009 1 #7 bridgebuster Active member Jun 27, 1999 3,969 Library: HISTORIC Type: WF ID = 169 Designation = 6WF W = 15.5 A = 4.62 D = 6 TW = 0.24 BF = 6 TF = 0.269 T = 4.737 K = 0.632 BF_2TF = 11.15 H_TW = 19.7 FY3P = - X1 = 2913 X2 = 1954 IX = 30.3 ZX = 11 SX = 10.1 RX = 2.56 IY = 9.7 ZY = 4.9 SY = 3.2 RY = 1.45 J = 0.12 CW = 79 a = 42 WNO = 8.6 SW = 3.47 QF = 2.22 QW = 5.52 FSTR = 6W(B6) 6x6 ,S53 1943, 6 WF(B6) 6x6 ,S54 1946,S56 1948, Upvote 0 Downvote
Library: HISTORIC Type: WF ID = 169 Designation = 6WF W = 15.5 A = 4.62 D = 6 TW = 0.24 BF = 6 TF = 0.269 T = 4.737 K = 0.632 BF_2TF = 11.15 H_TW = 19.7 FY3P = - X1 = 2913 X2 = 1954 IX = 30.3 ZX = 11 SX = 10.1 RX = 2.56 IY = 9.7 ZY = 4.9 SY = 3.2 RY = 1.45 J = 0.12 CW = 79 a = 42 WNO = 8.6 SW = 3.47 QF = 2.22 QW = 5.52 FSTR = 6W(B6) 6x6 ,S53 1943, 6 WF(B6) 6x6 ,S54 1946,S56 1948,
Feb 24, 2009 1 #8 unclesyd Materials Aug 21, 2002 9,819 Here is the website of our own SlideRuleEra that has some older data. http://www.slideruleera.net/miscellaneous.html Upvote 0 Downvote
Here is the website of our own SlideRuleEra that has some older data. http://www.slideruleera.net/miscellaneous.html
![[pipe]](/data/assets/smilies/pipe.gif "[pipe] [pipe]")