Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

old metal floor deck tables

Status
Not open for further replies.

jloo73

Structural
Joined
Sep 22, 2005
Messages
11
Location
US
Doing some structural review of an existing steel building with castellated steel beam and concrete on metal deck.

I found that the steel beams are adequate for the new loading condition, however I am unable to find any information on the metal deck and suspect that it will not work for the new loading.

The deck is designated as NKX 16-16 alternated with SEC 21-16. This is all the information I have. Building was designed in 1964

I did find some info on corrugated deck with a flat steel pan that went by the designation 20-20. Does anyone know which number goes with which part of the deck and what company may have used this designation.

Thanks
 
NKX and SEC 21 are Robertson deck designations.
 
Thanks mrengineer!

Robertson's website had old deck tables available. The manf. tip was very useful.

Thanks again.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top