Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Offshore Pile Jacketing Works using Steel Plates

Status
Not open for further replies.

Meesamali512

Structural
Jul 12, 2012
30
Dear All,

We have an offshore project of structural repair works in which we have to strengthen the piles using steel plates welded to the tubular steel piles. The tubular steel piles are used to support the composite deck system and the whole structure is entirely in offshore location (about 50m from port). The piles are getting corroded due to sea water and now the client wants to protect and strengthen the piles using steel plates and then later to be coated with PU coating works.

I was reading some online documents in which they've mentioned that the piles (steel) can also be strengthened using FRP material and its easier to apply, more durable and even at times lesser in cost. Moreover corrosion problem can be easily avoided increasing the life of the structure.

If somebody has any info regarding FRP over "offshore steel tubular piles", then kindly share as I want to submit a really competitive proposal.

I have also attached herewith strengthening scheme proposed by the client.


Regards
 
Replies continue below

Recommended for you

Hi Everyone,

After lot of search I found this link on the internet and I believe their system is closest to what I am looking for. But my main concern is regarding design of this system, its pricing and its installation procedures. If anyone has done any projects of similar kind then Kindly let me know. I am trying to close it asap as we have to submit our bid either with steel jacketing or with some alternate cost-effective system.

Here is the link.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor