Hi, I've been given the task to design a spaceframe chassis for an offroad buggy. One of the jobs is to calculate the bending, torsion, stiffness of the chassis. I'm going to to a simple free body bending moment diagram to see how the components of the vehicle puts loads and stress on the chassis. What other hand calculations can I do e.g. to work out the torsion stress? Would I distribute all the loads onto one side of the vehicle, e.g. if it landed on two wheels?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations JAE on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Offroad buggy space frame analysis
- Thread starter jonnyl888
- Start date
GregLocock
Automotive
"Would I distribute all the loads onto one side of the vehicle, e.g. if it landed on two wheels? "
Yes very much so. In fact I'd have thought a one wheel landing is quite likely.
Grab a copy of Mike Costin's book, the appendix includes spaceframe analysis.
Cheers
Greg Locock
New here? Try reading these, they might help FAQ731-376
Yes very much so. In fact I'd have thought a one wheel landing is quite likely.
Grab a copy of Mike Costin's book, the appendix includes spaceframe analysis.
Cheers
Greg Locock
New here? Try reading these, they might help FAQ731-376
- Status
Similar threads
- Locked
- Question
- Locked
- Question