Jan 26, 2007 #1 Muleman Petroleum Feb 23, 2006 13 Can anyone give me an idea where one would find pump/driver such as the above?
Jan 26, 2007 #2 dcasto Chemical Jul 7, 2001 3,570 a couple of other items maybe, maximum pressure and flowrate. Material of construction stainless steel, carbon, plastic. Motor requirements 480 volt 60 hz 3 phase? motor class, explosion proof? fluid properties, viscosity, VP, etc. A quick, but not the cheapest for industrial is http://www.grainger.com/Grainger/ww...&operator=prodIndexRefinementSearch&L1=Pumps, Upvote 0 Downvote
a couple of other items maybe, maximum pressure and flowrate. Material of construction stainless steel, carbon, plastic. Motor requirements 480 volt 60 hz 3 phase? motor class, explosion proof? fluid properties, viscosity, VP, etc. A quick, but not the cheapest for industrial is http://www.grainger.com/Grainger/ww...&operator=prodIndexRefinementSearch&L1=Pumps,
Jan 29, 2007 Thread starter #3 Muleman Petroleum Feb 23, 2006 13 Sorry, I guess I was expecting you to read my mind. We're pumping water, need at least 40 gpm at 150 psig. Upvote 0 Downvote
Sorry, I guess I was expecting you to read my mind. We're pumping water, need at least 40 gpm at 150 psig.
Jan 29, 2007 #4 dcasto Chemical Jul 7, 2001 3,570 Your pump only require about 5 HP. I have not seen off the self pumps in the range you are looking for, here is one that is almost off the shelf. http://www.rotor-tech.com/electric.htm Upvote 0 Downvote
Your pump only require about 5 HP. I have not seen off the self pumps in the range you are looking for, here is one that is almost off the shelf. http://www.rotor-tech.com/electric.htm
