Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Obtain Shear Force from a shell element on Ansys Workbench

Status
Not open for further replies.
FukushuuTenshi

FukushuuTenshi

Structural
Jun 25, 2017
6
I managed to obtain M11, M22 and M12 using an user-defined result M=sqrt(sx^2+sy^2)*t^2/6 from this post thread569-410520 but how I might obtain it for shear forces?
 
Status
Not open for further replies.

Similar threads

struclearner
  • Locked
  • Question
Reaction Force Distribution in ANSYS Workbench!
Replies
0
Views
894
struclearner
struclearner
H
  • Locked
  • Question
how to apply triangular load on an area, in ANSYS Workbench static module
Replies
1
Views
3K
karachun
karachun
O
  • Question
ansys civata
Replies
0
Views
2K
oktaeng1
O
R
  • Locked
Guidance on Settlement Analysis of Steam Generator in Oil Plant Using ANSYS
Replies
0
Views
681
Rabea-19
R
S
Concrete Shrinkage modelling with ANSYS
Replies
1
Views
2K
crshears
crshears

Part and Inventory Search

Sponsor

Back
Top Bottom