Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
nylon finishing
- Thread starter nylon
- Start date
What's the durometer of your nylon? If it is hard, you may be able to actually polish it with an abrassive. If it is soft, you might look into "flashing" it with a high heat source, to burn off small particles. "Happy the Hare at morning for she is ignorant to the Hunter's waking thoughts."
prototypeman
Mechanical
I do prototypes, and what we usually do is get a buffing wheel and maybe some buffing compound. You can get a nice smooth part quite quickly.
Good luck.
Good luck.
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question
- Locked
- Question