Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations JAE on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Nx9 Electrical Routing and Qualify Part - Port Array

Status
Not open for further replies.
Xavierj

Xavierj

Automotive
Joined
Feb 17, 2015
Messages
1
Location
DE
thread561-364416

Hello everyone,

I´m facing the same problem than Icetea73 with defining the multi-port Array function.

I am working in the Electrical application in NX 9, trying to define a circular array for 40 pins.

I have tried to define the Array thanks to a pattern geometry or transform but without any success.

Does one of you have the key to this problem?
I would be greatly thankful!
 
 http://files.engineering.com/getfile.aspx?folder=bc97bdeb-af35-4065-aeb6-599908fe2f6b&file=Port_Arrays.PNG
Status
Not open for further replies.

Similar threads

nyang
  • Question Question
Moving body from part back to assembly level part
Replies
3
Views
10K
Toost
Toost
Dave W
  • Locked
  • Question Question
Electrical Routing and Deformable
Replies
1
Views
421
jerry1423
jerry1423
A
  • Locked
  • Question Question
Has anyone attempted to use Animation Designer and Part Families on the same file?
Replies
1
Views
3K
Kenja824
Kenja824
CAD2015
  • Question Question
Convert components from an assembly into one single part.......
Replies
5
Views
2K
CAD2015
CAD2015
CAD2015
  • Locked
  • Question Question
NX Electrical Routing vs Catia Electrical Harness
Replies
0
Views
248
CAD2015
CAD2015

Part and Inventory Search

Sponsor

Back
Top