Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
NX7.5 - SURFACES AREA 2
- Thread starter CAD2015
- Start date
-
1
- #2
Measure face is probably your best bet.
Measure bodies will report the entire surface area of the selected body(ies), this might be a little faster if you are interested in the surface area of the entire body and not just certain faces.
www.nxjournaling.com
Measure bodies will report the entire surface area of the selected body(ies), this might be a little faster if you are interested in the surface area of the entire body and not just certain faces.
www.nxjournaling.com
- Thread starter
- #3
-
1
- #4
if you have a assembly that is fitted together and you are not painting the areas touching. Look into Geo Wrap or assembly warp assemblies -> advanced -> wrap asm... set the distance tolerance closer. and and new sets of splitting plain to help sharpen it around objects. (if adding a plane don't forget to click the add new set or it will not accept your plane selection.)
- Thread starter
- #5
- Status
Similar threads
