Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

NX6 Routing Mechanical Bend Report

Status
Not open for further replies.

moparx11

Automotive
Joined
Sep 13, 2009
Messages
1
Location
US
Hey guys,

i am trying to figure out how to make the bend report in the model for a part generated in the routing mechanical application appear in the drawing for the part. i was able to copy/paste the report in to a tabular note, but obviously that won't update with changes to the part.

thanks
 
Without writing an NX Open application, there is no way to create an 'associative' link between a Tabulated Note and the output from the NX Routing 'Bend Table' function.

John R. Baker, P.E.
Product 'Evangelist'
Product Design Solutions
Siemens PLM Software Inc.
Industry Sector
Cypress, CA

To an Engineer, the glass is twice as big as it needs to be.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top